Pedestrian access security gates entrance gate security Anti -
Pinch Mechanical Structure
Standard functions & features of Swing Barrier Gate
1. Alarm function:when arms are pushed by force illegally, alarm
will be triggered automatically and arms will be set locked.
turnstile can check by itself when it is have problem, it is good
for customer to maintain and use
2. Turnstile can setting the working condition by press the button
of main control board.
3. Anti-pinch function: turnstile have Mechanical/ infrared
induction Anti-pinch functions( when it is meet the hinder during
the reset time, the electrical machine closed work automatically in
specified time, the turnstile will default the delayed and reset
again till reset succeed)
4. The turnstile will closed the door when somebody enter the gate
illegal, Tailgating or break into negative direction gate.
5. Before received the open signal, the turnstile will lock
automatically
6. The arm have the collision avoidance function: when the
turnstile arm closed, if it is under the collision, the arm will
open to protect the Transmission of inner machine.
7. Automatic Reset Functions: after you swap the card, during the
specific time (the system is 10s), if you didn’t pass the
turnstile, the system will cancel your authority automatically to
pass the gate, (reset time is 1~60s you can adjust it
How to guarantee kids will not be hurt when they using the Swing Barrier Gate ?
1) RONA Swing Barrier Gate using epecial mechanism structure, the
strength not enough to hurt them.
2) RONA using high quality infrared , the erroneous judgement
almost zero.
3) RONA Swing Barrier Gate can using in outside totaly - Waterproof
Extend functions
1. Nonstandard program customized
2. LED counting function
3. Secondly opening function to meet for ticket system and
anti-passback project
4. Voice&light prompt function
5. Voice&light alarm function
6. Normally open or closed can be adjust to meet the requirements
of the different place
Technical parameters
| Housing material | 304 grade stainless steel(thickness 1.5mm) |
| Length of arm | 600mm(standard)/500-900mm(option) |
| Arm's rotation angle | 180 degree |
| Swing direction | single or bi-direction |
| Driving electromotor | DC Brush electromotor 50W/24V |
| Normal useful life | 3million times |
| Working voltage | AC220V±10%V/50±10%Hz,AC110V±10%/50Hz±10% |
| Temperature | -10C - 50C |
| Working environment | Indoor ,outdoor(with a tent over) |
| Transit speed | 40 persons/min(open often) 25-30 person/min(close often) |
| Open/close time | 2~3s |
| Automatic reset time after fault | 10s |
| Communication interface | RS485 standard distance less than 1200 meters |
| Input interface | Dry contact signal or +12V level signal or DC12V pulse signal with
width of more than 100ms, driving current > 10mA |
| Relative humidity | <= 90% no condensation |
Product site case diagram
