1400MM*200MM*1020MM Automatic Systems Speed Gate Turnstile For
Indoor Place
Brief Introduction
RNCF7008HD series speed gate turnstile adopts the latest
electromechanical integration control technology, advanced sensor
Anti-tail detection system, suitable for entrance and exit areas
such as ports, docks, stations, buildings, etc. Realize the
entrance and exit control
management of authorized passage
This is an automation equipment which totally includes advanced
computer technology, network technology, intelligent automation
technology.
The whole machine adopts SUS 304 stainless steel design, and the
rigorous traffic logic calculation Combined with the ingenious
distribution of
sensors for human walking characteristics, it can distinguish a
variety of complex traffic modes. On the premise of fully ensuring
traffic safety,
effectively prevent tailgating and provide customers with a safe,
convenient and comfortable noble experience.
Traffic Mode
- Normally open mode
Under normal conditions, the baffle is retracted inside the chassis
and the channel is Pass status, read a valid card, pass directly.
Only
after an illegal passer enters the channel, the baffle will extend
and close to block the passage of passers-by. This pass mode is
generally
used for the occasions with large traffic flow or concentrated
traffic.
2. Normally closed mode
In this mode, when there is no traffic at ordinary times, the
channel is closed state, when the passer reads a valid card, the
channel is
opened (baffle retracted into the chassis), passers can pass
through smoothly.
3. Free pass mode
Passers can freely enter and exit the channel without reading a
card. The mode is generall used to cancel the channel current
limiting
function in some traffic peak periods in order to speed up the use
of occasions.
Product Functions
1. Secondary opening function: If someone intrudes in the opposite
direction after the passerby swipes the card, the baffle will be
closed
automatically. After the intruder exits, the baffle will open again
automatically. (This feature is very applicable to authority
management and
control fields such as scenic spots and stations scene)
2. Beep warning function:This turnstile will be beep to warn
manager that illegal action being happened.
3. Logical monitoring: 9-12 pair sensor (can enlarge to 24 pair
sensor), turnstile system will monitor the passenger, kids,
wheelchair,
luggage's position, and also can warm alarm when have trailing,
break in, opposite enter illegal action happened.
4. LED indicator function
5. Intelligent anti-pinch function: We have sensor anti-pinch
design / motor torque anti-pinch design /mechanical anti-pinch
design, those
design to make sure passage’s safety when the pass.
6. Memory Function:The device can memorize more than 2 consecutive
legal signals (including simultaneous and opposite direction),
complete the effective passage in turn, The maximum number of
memory times is 255.
7.Touch screen parameter setting: The parameter of this turnstile
can be set through the touch screen, simple and convenient.
Technical Parameter
| Size: | 1400MM*200MM*1020MM |
| Motor type: | Servo motor |
| Main board type: | V206 |
| Normal running life: | 5 million times |
| Sensor quantity: | 9-12 pairs |
| Pass speed: | 25-30 person/min |
| Housing material: | 304 stainless steel&Stoving varnish |
| Passage width: | 500-100MM |
| Swing arm material: | Acrylic |
| Input interface: | AC100-240V,50/60HZ |
| Working voltage: | DC24V |
| Working power: | 60-100W |
| Working temperature: | -15℃-70℃ |
| Working humidity: | 5%-90% |
| Working environment: | Indoor |
